SoundOff nERGY 400 Series Console Siren - Button, 1 speaker

The SoundOff nERGY 400 Series Console Siren is a powerful and versatile solution designed to enhance scene coverage with clear and direct auditory communication. Combining the amplifier and control panel into one compact, console-mounted unit, this siren provides seamless operation for emergency response and vehicle safety products. Whether you're navigating traffic or managing an emergency scene, this siren ensures your message is heard.

Key Features:

• High-Performance Sound: Amplified audio intensity for effective scene coverage and emergency signaling.
• Dual-Tone Capability: 200-watt systems can play two siren tones simultaneously for maximum impact (requires two speakers).
• User-Friendly Design: Extra-large buttons and ergonomic spacing ensure precise control, even with gloves.
• Integrated Functionality: Control panel switches operate up to 12 relay outputs (three 20-amp and nine 10-amp relays).
• Built-In Protections: Safeguards against over/under voltage, short circuit, and reverse polarity.
• Hands-Free Mode: Enables tone cycling or cancellation via the vehicle’s horn button when connected to the horn-ring circuit.

Specifications:

• Certifications: SAE J1849, CA Title 13 (when using SoundOff Signal speakers).
• Input Voltage Range: 10-16 VDC.
• Power Output: 100 watts (single speaker) or 200 watts (two speakers required).
• Current Draw:
  • 7 Amps @ 13.4 VDC (100W speaker).
  • 14 Amps @ 13.4 VDC (2 x 100W speakers).
• Standby Current:
  • 500mA (ignition on).
  • <10mA (ignition off).
• Audio Frequency: 500Hz – 3kHz.
• Siren Frequency: 675Hz – 1633Hz.
• Operating Temperature: -40°C to +50°C.
• Dimensions:
  • Control Panel: 3.51” L x 6.98” H x 1.17” D.
  • Amplifier: 6.62” L x 7” H x 6.51” D.

What’s Included:

• SoundOff nERGY 400 Series Console Siren (Button Control, 1 Speaker).
• Integrated Amplifier and Control Panel.
• Wiring Harness and Installation Hardware.
• Installation and User Guide.

How to Install:

1. Mount the Control Panel: Install the console-mounted control panel in an accessible location.
2. Connect Wiring: Use the provided wiring harness to connect the siren to the vehicle’s electrical system and speaker(s).
3. Configure Settings: Adjust the controls for your desired tone settings and relay outputs.
4. Test the System: Verify all tones, functions, and the hands-free mode are operational.