SoundOff nERGY 400 Series Console Siren - Button, 2 speaker

The SoundOff nERGY 400 Series Console Siren - Button Control, 2 Speakers is a high-performance, dual-tone emergency siren designed for maximum traffic-clearing power and precise operational control. This 200-watt siren integrates an amplifier and control panel into a compact, console-mounted unit, ensuring efficient use of space while delivering superior sound output.

Key Features:

• Dual-Tone Capability: Simultaneously broadcast two siren tones for unmatched traffic-clearing power (requires two speakers).
• Compact, Integrated Design: Combines control panel and amplifier into one unit for seamless console installation.
• Button Control: Extra-large buttons with ergonomic spacing reduce accidental activation and simplify operation.
• High Power Output: 200 watts of audio intensity for superior scene coverage.
• Built-In Protections: Includes safeguards against over/under voltage, short circuit, and reverse polarity.
• Hands-Free Operation: Siren tones can be cycled or canceled by pressing the vehicle's horn button when connected to the horn-ring circuit.
• Relay Control: Operate up to 12 relay outputs (three 20-amp and nine 10-amp) directly from the control panel.

Specifications:

• Certifications: SAE J1849, CA Title 13 (when used with SoundOff Signal speakers).
• Input Voltage Range: 10-16 VDC.
• Power Output: 200 watts (requires two speakers).
• Current Draw: 14 Amps @ 13.4 VDC (2 x 100W speakers).
• Standby Current:
  • 500mA (ignition on).
  • <10mA (ignition off).
• Audio Frequency: 500Hz – 3kHz.
• Siren Frequency: 675Hz – 1633Hz.
• Operating Temperature: -40°C to +50°C.
• Dimensions:
  • Control Panel: 3.51” L x 6.98” H x 1.17” D.
  • Amplifier: 6.62" L x 7” H x 6.51” D.

What’s Included:

• SoundOff nERGY 400 Series Console Siren - Button Control (200 Watt).
• Integrated Amplifier and Control Panel.
• Wiring Harness and Installation Hardware.
• User and Installation Manual.

How to Install:

1. Mount the Control Panel: Install the console-mounted control panel in a location that is easily accessible.
2. Connect Speakers: Attach two 100-watt speakers to achieve the 200-watt dual-tone functionality.
3. Wire the System: Use the provided wiring harness to connect the siren system to the vehicle’s electrical setup.
4. Configure Settings: Set up tone preferences and relay outputs using the control panel.
5. Test the System: Verify all tones, relay controls, and hands-free functionality are operational.